You are here: Home » Precast Lintels
0 items in your wish list

Precast Lintels


Use Any Way Up

Minimum end bearing: up to 8' long lintel - 100 mm 9' and 10' - 150 mm

Casting tolerances : + - 5mm including demould taper.

Designed and manufactured in accordance with
BS 8110.

 

Load/Span Table

Click for Precast Lintel Load/Span Table

Precast Lintels
PRECAST LINTELS

       
Metric (mm) Imperial CODE Wish List
610 x 145 x 1002' x 6" x 4"LIN 00
    
735 x 145 x 1002'5" x 6" x 4"LIN 01
    
965 x 145 x 1003'2" x 6" x 4"LIN 02
    
1065 x 145 x 1003'6" x 6" x 4"LIN 03
    
1220 x 145 x 1004' x 6" x 4"LIN 04
    
1370 x 145 x 1004'6" x 6" x 4"LIN 05
    
1525 x 145 x 1005' x 6" x 4"LIN 06
    
1675 x 145 x 1005'6" x 6" x 4"LIN 07
    
1830 x 145 x 1006' x 6" x 4"LIN 08
    
2130 x 145 x 1007' x 6" x 4"LIN 10
    
2440 x 145 x 1008' x 6" x 4"LIN 12
    
2745 x 145 x 1009' x 6" x 4"LIN 13
    
3050 x 145 x 10010' x 6" x 4"LIN 14
    
1220 x 220 x 1004' x 9" x 4"LIN 31
    
1525 x 220 x 1005' x 9" x 4"LIN 32
    
1830 x 220 x 1006' x 9" x 4"LIN 33
    
2130 x 220 x 1007' x 9" x 4"LIN 34
    
2440 x 220 x 1008' x 9" x 4"LIN 35
    
2745 x 220 x 1009' x 9" x 4"LIN 36
    
3050 x 220 x 10010' x 9" x 4"LIN 37
    

Installation

  •  Ensure the lintel is not damaged.
  • The lintel should be installed with a minimum end bearing of 150mm.
  • Ensure the lintel is used in its correct orientation and is fully bedded in a level position on mortar across its length and width.
  • The masonry below the lintel should be built in accordance with EN 1996-1-1.
  • Where required in external walls a flexible damp proof course or cavity tray shall be installed in accordance with current building regulations.
  • If required rendering of the lintel is not deemed to be detrimental to its performance.
  • Do not cut into the lintel to form rebates or modify in any way , if in doubt please contact our technical department.

 

Stockist become a stockist envionment quality